Snow & Ice Equipment

Snow & Ice Equipment

Spreaders

 
 
 
Truck Bodies
 
 
 
Hoists

Salt Slurry Generator

Increases salt volume by 25%.  Brine process activates faster & helps material stay on the road surface.  Available for the MCV V-Box Spreader & the RDS All-Season Body.

Roll Spreader

Under Tailgate Spreader

A versatile and inexpensive spreader which allows you to dispense a variety of free-flowing granular materials for the purpose of making roads, driveways, parking lots and runways safe for travel.  Available in mild and stainless steel.

Replacement Tailgate Spreader

The under tailgate Roll Spreader allows you to drop free-flowing material in an 88" or 96" wide path directly behind the truck -- critical in areas where users do not want to broadcast material over a wide area.  Available in mild and stainless steel.

Ideal for spreading abrasives for snow & ice control, chip spreading and seal coating operations.

Rear Cross Conveyor

The rear cross conveyor is a low-maintenance, self-cleaning unit that is perfect for the small municipality that needs to spread abrasives in the winter and shoulder for spring and summer work.

Available in mild or stainless steel with 12" or 18" wide conveyor.
This spreader completely replaces the original dump body tailgate.  Each spreader is custom-built to your dump body to ensure a tight fit, no material leakage and excellent spinner clearance. 

Available in mild or stainless steel on 1-ton and large dump applications.  Many models are available!

MSPV Spreader

A V-box for the small municipality or contractor that does not require a large amount of snow and ice control.  This unit is designed for use in pickups, platforms and small dump bodies.  Available in mild or stainless steel, hydraulic or electric drive.

Mid-Size Spreader

A mid-size v-box to be used by municipalities or contractors for their granular snow and ice control needs.  This unit is designed for use on platforms or small to medium sized dump bodies. 

Available in mild or stainless steel.

MCV Spreader

Modular-design v-box spreader available in single auger, dual auger or conveyor chain discharge.  Can be chassis mounted, dump body mounted or skid mounted depending on your needs.

Available in mild or stainless steel.

Combination Unit

A skid-mounted v-box spreader with liquid tanks to provide a combination of pre-wetting and anti-icing all in one unit.  This versatile piece of equipment can be custom designed to satisfy your snow and ice control needs.

Available in mild or stainless steel.

Radius Dump Spreader (RDS)

Duz-Mor

A multi-purpose radius body with the ability to be used as a dump body or a spreader.  Material can be discharged through the rear tailgate or the forward metering gate onto a spinner assembly or a front cross conveyor.

Available in mild or stainless steel.

Flat Floor Dump Spreader (FFDS)

A multi-purpose flat floor body with the ability to be used as a dump body or a spreader.  Material can be discharged through the rear tailgate or the front drop chute onto a spinner assembly.

Available in mild or stainless steel.

Dump V-Box Spreader (DVS)

This is a chassis mounted v-box with a 34" wide conveyor with a rear opening tailgate.  This allows for a high rate of material discharge.  Available in mild or stainless steel.
A multi-purpose v-body with the ability to be used as a dump body or a spreader.  Material can be discharged through the rear tailgate or the forward metering gate onto a spinner assembly or a front cross conveyor.

Available in mild or stainless steel.

Dump Tip Spreader (DTS)

A multi-purpose dump body with the ability to be used as a dump body or a spreader.  By tilting the floor up, material can be discharged through the forward metering gate onto a left-hand front spinner assembly.

Available in mild or stainless steel.
 
 
 
Liftgates
 
 
 
Cranes
 
 
 
Lights
 
 
 
Compressors
 
 
 
Toolboxes & Van Shelving
 
 
 
Specialty Products
 
 
 
Parts
 
 
 
Service
 
 
 
Contact Us